Zipp SL Sprint Carbon Stem (+/-12°) (100mm)
This is the Zipp SL Sprint Carbon Stem. Zipp set out with one clear goal – design the best-performing carbon stem. Ever. The SL Sprint does that by having the highest stiffness-to-weight ratio of any stem on the market.
Just as cyclists optimize performance by being as light but as powerful as possible, the SL Sprint Stem is an ideal balance of the stiffness and lightweight to be responsive without wasting a single watt. The stem weighs in at just 1.8g per newton meter of stiffness. How? The SL Sprint was designed using SRAM’s Exogram™ technology, the same used in the ultra light and strong SRAM RED cranks.
The SL Sprint was designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem.
The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body. Available in six sizes ranging from 90 to 140mm to meet any rider’s fit needs. Includes stiff aluminum faceplate and steel Torx T25 bolts for precise torque readings and ease of adjustment. Black with white “Zipp” logo.Torx®-Head Bolts:
Zipp chooses Torx®-head bolts for its stems and aero bars - why? It comes down to the way the tool head interacts with the bolt. Common hex tools tend to strip the bolt head if the bolt is over torqued. This is especially true with lightweight bolts. Zipp wanted to be able to use a lightweight bolt with reliable performance. Bolts on stems and aero bars are critical to safety – having a reliable bolt is crucial. Zipp chose a bolt size that was best suited for Zipp stems; T25. The standard Torx tool head for an M5 bolt is a T25. The T25 is becoming a go-to bolt in the bicycle industry. What’s more, the T25 tool is a common in bike shops or hardware stores and is readily available alone or in multi-tool sets. For your convenience, Zipp includes a T25 wrench with all stems and aero bars. The Torx® head is more robust that hex-head bolts and will not easily strip. Torx® fasteners also were designed for use with a torque wrench, which is needed to achieve the precise torque reading for proper installation. It’s simply a better bolt:
- Won’t easily strip.
- Provides more accurate torque readings.
- More durable.
Weight (100mm): 165g
Sizes: 90, 100, 110, 120, 130, 140
Material: Unidirectional carbon
Hardware: Stainless steel with Torx® T25 heads
Clamp Diameter: 31.8mm
Steer tube diameter: 1 1/8 in
Stack height: 41.0mm
Clamp width: 50mm
Clamp torque - max: 6Nm
Weight: 188g (130mm)
This product was added to our catalog on September 1, 2014.